Alarm - TP-Link T3700G-28TQ User Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Reference manual (408 pages)
Table of Contents
Advertisement
Choose the menu SNMP→RMON→Event to load the following page.
The following entries are displayed on this screen:
Event Table
Select:
Index:
User:
Description:
Type:
Owner:
Status:
15.3.4 Alarm
On this page, you can configure Statistic Group and Alarm Group for RMON.
Figure15-11 Event Config
Select the desired entry for configuration.
Displays the index number of the entry.
Enter the name of the User or the community to which the
event belongs.
Give a description to the event for identification.
Select the event type, which determines the act way of the
network device in response to an event.
•
None: No processing.
•
Log: Logging the event.
Notify: Sending trap messages to the management
•
station.
•
Log&Notify: Logging the event and sending trap
messages to the management station.
Enter the name of the device or user that defined the entry.
Select Enable/Disable the corresponding event entry.
334
Advertisement
Table of Contents
