TP-Link T3700G-28TQ User Manual page 39

After SSL is effective, you can log on to the Web management page via https://192.168.0.1. For
the first time you use HTTPS connection to log into the switch with the default certificate, you will
be prompted that "The security certificate presented by this website was not issued by a trusted
certificate authority" or "Certificate Errors". Please add this certificate to trusted certificates or
continue to this website.
On this page you can configure the SSL function.
Choose the menu System→Access Security→SSL Config to load the following page.
The following entries are displayed on this screen:
Global Config

SSL:
Certificate Download

Certificate File:
Key Download

Key File:
Note:
1. The SSL certificate and key downloaded must match each other; otherwise the HTTPS
connection will not work.
2. The SSL certificate and key downloaded will not take effect until the switch is rebooted.
3. To establish a secured connection using https, please enter https:// into the URL field of the
browser.
4. It may take more time for https connection than that for http connection, because https
connection involves authentication, encryption and decryption etc.
Figure 4-16 SSL Config
Select Enable/Disable the SSL function on the switch.
Select the desired certificate to download to the switch. The
certificate must be BASE64 encoded.
Select the desired SSL Key to download to the switch. The key
must be BASE64 encoded.
27