TP-Link T3700G-28TQ User Manual page 329

The following entries are displayed on this screen:
Port Config

UNIT:
Select:
Port:
Status:
Guest VLAN:
Control Mode:
Control Type:
Authorized:
LAG:
Figure 14-23 Port Config
Select the unit ID of the desired member in the stack.
Select your desired port for configuration. It is multi-optional.
Displays the port number.
Select Enable/Disable the 802.1X authentication feature for the
port.
Select Enable/Disable the Guest VLAN feature for the port.
Specify the Control Mode for the port.
Auto: In this mode, the port will normally work only after
•
passing the 802.1X Authentication.
• Force-Authorized: In this mode, the port can work normally
without passing the 802.1X Authentication.
• Force-Unauthorized: In this mode, the port is forbidden
working for its fixed unauthorized status.
Specify the Control Type for the port.
MAC Based: Any client connected to the port should pass the
•
802.1X Authentication for access.
• Port Based: All the clients connected to the port can access
the network on the condition that any one of the clients has
passed the 802.1X Authentication.
Displays the authentication status of the port.
Displays the LAG to which the port belongs to.
317