Policy Binding; Binding Table - TP-Link T3700G-28TQ User Manual

S-Condition:
Redirect:
QoS Remark:

13.4 Policy Binding

Policy Binding function can have the policy take its effect on a specific port/VLAN. The policy will
take effect only when it is bound to a port/VLAN. In the same way, the port/VLAN will receive the
data packets and process them based on the policy only when the policy is bound to the
port/VLAN.
The Policy Binding can be implemented on Binding Table, Port Binding and VLAN Binding
pages.

13.4.1 Binding Table

On this page view the policy bound to port/VLAN.
Choose the menu ACL→Policy Binding→Binding Table to load the following page.
Select S-Condition to limit the transmission rate of the data packets in
the policy.
Rate: Specify the forwarding rate of the data packets those match

the corresponding ACL.
Out of Band: Specify the disposal way of the data packets those

are transmitted beyond the rate.
Select Redirect to change the forwarding direction of the data packets
in the policy.
Destination Port: Forward the data packets those match the

corresponding ACL to the specific port.
Select QoS Remark to forward the data packets based on the QoS
settings.
DSCP: Specify the DSCP region for the data packets those match

the corresponding ACL.
Local Priority: Specify the local priority for the data packets those

match the corresponding ACL.
Figure13-12 Binding Table
287