TP-Link T3700G-28TQ User Manual page 398
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Reference manual (408 pages)
Table of Contents
Advertisement
For example: Configure the IP address as 10.10.70.22, mask as 255.255.255.0 and
gateway as10.10.70.1. The detailed steps are shown as the figure below.
4） Configure the parameters of the FTP server which keeps the upgrade firmware, and
download the firmware to the switch from the FTP server. Store the downloaded firmware
in the switch with the name of image1.bin or image2.bin, and specify its attribute as
startup image or backup image.
Here take the following parameters of the FTP server as an example. IP address is
10.10.70.146; the user name for login to the FTP server is 3700 and the password is 123;
the name of the upgrade firmware is image.bin. Store the firmware as image1.bin in the
switch. The detailed steps are shown as the following figure.
Specify the attribute of the downloaded image1.bin as startup image.
386
Advertisement
Table of Contents
