TP-Link T3700G-28TQ User Manual page 409

1.3 Configuration
1. After completing installation, double click the icon
Software. The following screen will appear.
Enter the Name and the Password specified in the Authentication Server. The length of
Name and Password should be less than 16 characters.
2. Click the Properties button on Figure D-12 to load the following screen for configuring the
connection properties.
Send 802.1X protocol packets by Unicast: When this option is selected, the Client will send
the EAPOL Start packets to the switch via multicast and send the 802.1X authentication
packets via unicast.
Obtain an IP address automatically: Select this option if the Client automatically obtains the
IP address from DHCP server. After passing the authentication, the Client can be assigned
the IP address by DHCP server. The Client can access the network after getting the new IP
address.
Figure C-12 TP-LINK 802.1X Client
Figure C-13 Connection Properties
397
to run the TP-LINK 802.1X Client