TP-Link T3700G-28TQ User Manual page 396

Jetstream 28-port gigabit stackable l3 managed switch

Hide thumbs Also See for T3700G-28TQ:

Table of Contents

4） Configure the port selected in the step above shown as the following Figure 19-5.

Configure Bits per second as 38400, Data bits as 8, Parity as None, Stop bits as 1,

Flow control as None, and then click OK.

3. Download Firmware via bootutil menu

To download firmware to the switch via FTP function, you need to enter into the bootutil menu of

the switch and take the following steps.

1） Connect the console port of the PC to the console port of the switch and open hyper

terminal. Connect FTP server to port 1 of the switch.

Figure 19-5 Port Settings