Touchpanel Mounting - Crestron Isys TPS-3100L Operation Manual

®
Crestron Isys TPS-3100L
Operations Guide – DOC. 6291
6.4" Lectern/Wall Mounted Touchpanel

Touchpanel Mounting

Required Tools
#1 Phillips tip screwdriver
1. If the cover plate is attached, use a #1 Phillips screwdriver to loosen and
remove the four screws and plate.
2. Connect all required cables to the touchpanel.
3. Insert the touchpanel (without its faceplate) into the mounting option and
align the four screw holes.
4. Insert and tighten the four supplied screws (finger tight and then using a #1
Phillips screwdriver, tighten an additional 1/8-turn).
5. Insert the five buttons. If the buttons are engraved, verify that the placement
of the each button matches the programming.
6. Cover the mounted unit with the faceplate. Refer to the illustration after this
paragraph for guidance.
Exploded View for Mounting the TPS-3100L in the Optional BB-3100L Back Box
TPS-3100L
Optional custom engraved keys can be ordered (Crestron part number DB12-BTN)
separately by using the Crestron Engraver Software. Version 2.2.1.2 or later is
available from the Downloads | Software Updates section of the Crestron website
(www.crestron.com).
6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-3100L • 19
1
#6-32 x 1 " (2007254)
2
PAN HEAD SCREW, QTY. 4
SUPPLIED BY CRESTRON
BB-3100L