Touchpanel Removal; Recommended Cleaning; Programming Software - Crestron Isys TPS-3100L Operation Manual

6.4" Lectern/Wall Mounted Touchpanel

Programming Software

20 • 6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-3100L

Touchpanel Removal

If it is necessary to remove the touchpanel after it has been installed into a mounting
surface, complete the following steps in the order provided to remove the
touchpanel. The only tool required is a #1 Phillips tip screwdriver.
1. Lift the plastic cover off the touchpanel. Do not apply excessive
pressure to the touchscreen.
2. Remove the plastic buttons from the touchpanel. If the buttons are
engraved, be sure to record the button engraving with the button
location so that the buttons can be properly returned.
3. Loosen and remove the four screws that secure touchpanel to the
mounting option in use.
4. Using equal pressure, carefully remove the touchpanel from the
opening.
5. If necessary, secure and label the attached cables before disconnecting
them from the back of the touchpanel.

Recommended Cleaning

Keep the surface of the touchscreen free of dirt, dust, or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. The faceplate may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touchscreen. Wipe touchscreen clean and avoid ingress of moisture
beneath panels.
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website (www.crestron.com). Go to
http://support.crestron.com
submitted to Crestron's True Blue Support. First-time users will need to establish a
user account.
Setup is easy thanks to Crestron's Windows
Application Builder™ (AppBuilder) creates a complete project, with no special
programming required. Crestron AppBuilder completes all necessary programming
for a base system including all touchpanel screens and the control system program.
Once Crestron AppBuilder creates the project, the system interfaces and program
logic can be customized with other Crestron development tools such as SIMPL
Windows and Crestron VisionTools Pro-e (VT Pro-e).
The program output of Crestron AppBuilder is a SIMPL Windows program with
much of the functionality encapsulated in macros. Therefore, extending the
capabilities of the system is very easy. Crestron AppBuilder and SIMPL Windows
are intended for users with different levels of programming knowledge. Crestron
AppBuilder is easier to use for the beginning programmer, and much faster for all
Crestron Isys
to post your own question or view questions you have

-based programming software. Crestron
Operations Guide – DOC. 6291
®
TPS-3100L