Crestron Isys TPS-3100L Operation Manual page 19

®
Crestron Isys TPS-3100L
Operations Guide – DOC. 6291
6.4" Lectern/Wall Mounted Touchpanel
Hardware Connections for the TPS-3100L (Back of the Unit is Shown)
RS-232:
TO PC OR ANY
RS-232 DEVICE
CRESNET:
TO CONTROL SYSTEM AND
OTHER CRESNET DEVICES
RS-232
This 6-position RJ-11 connector mates with a serial port of a PC. The connecting
cable is not supplied. Prior to installation, use this port for direct connection between
the touchpanel and a PC to load files to a touchpanel without a network connection.
In the event that modular cables or an RJ-11 to DB9F adapter is not available, the
table below and diagram on the next page provide information so that the cable can
be fabricated on site. Refer to "RS-232 Menu" on page 14 for proper RS-232 port
configuration settings.
RS-232 Pinouts
PIN # DESCRIPTION
1 CTS
2 GND
3 RXD
4 TXD
5 RTS
6 N/C (Not connected)
6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-3100L • 15
AUDIO INPUT: UNBALANCED VIDEO INPUTS
LINE-LEVEL, BALANCED &
UNBALANCED AUDIO SOURCES
MICROPHONE OUTPUT:
PROVIDES LINE-LEVEL
BALANCED OUTPUT
1 6
Top
Front
6
1
USING COAX CABLE:
COMPOSITE OR S-VIDEO
BALANCED VIDEO INPUTS
USING TWISTED PAIR CABLE:
COMPOSITE OR S-VIDEO