Table of Contents
Advertisement
TSS-470E Installation
Use the following procedures to install the TSS-470E.
NOTE: The TSS-470E touch screen supports various mounting applications. Installation of the touch
screen requires additional mounting hardware (not included):
The
TSS-470E-MSMK-B-T
l
directly to glass, granite, marble, wood paneling, plaster, smooth masonry, or virtually any
other flat surface.
The
TSS-470E-TTK-B-T
l
45° angle tilt.
The
TSS-470E-WMK
l
drywall or paneling for postconstruction applications.
In the Box
Qty.
Description
1
TSS-470E-B-T, 3.5 in. Desk Scheduling Touch Screen
Install the Mounting Hardware
One of the available TSS-470E mounting accessories (not included) must be installed along with the
TSS-470E. Refer to the following installation procedures depending on the chosen mounting hardware:
For applications where the touch screen will be mounted directly to glass, granite, marble, wood
l
paneling, plaster, smooth masonry, or a similar flat surface, refer to
on page
25.
For applications where the touch screen will be mounted onto a tabletop or similar surface, refer
l
to
TSS-470E-TTK Installation on page
For postconstruction applications where a back box will be installed into drywall, paneling, or a
l
tabletop, refer to
Connect the Touch Screen
Route all necessary cables to the touch screen as described in the installation instructions for the chosen
mounting accessory (refer to
the rear of the touch screen as shown in the following image.
Product Manual — Doc. 9347A
multisurface mount kit allows the touch screen to be mounted
tabletop kit provides a tabletop enclosure for the touch screen with a
wall mount kit allows the touch screen to be installed into existing
34.
TSS-470E-WMK Installation on page
Install the Mounting Hardware on page
TSS-470E-MSMK Installation
39.
23). Then, make all connections to
TSS-470E • 23
Advertisement
Table of Contents
