Touchpanel Mounting - Crestron Isys TPS-6L Operations & Installation Manual

®
Isys 5.7" Wall Mount Touchpanel
®
30 • Isys
5.7" Wall Mount Touchpanel: TPS-6L
NOTE: Pre-construction refers to framed walls prior to hanging drywall.
Post-construction refers to framed walls with drywall hung.
NOTE: There is also a rack mount kit (RMK-6L) available for the TPS-6L. Refer to
the latest version of the RMK-6L Installation Guide (Doc. 6599).
If the BB-6L or PMK-6L are to be used and a touchpanel is not available, the
installer can either leave the hole in the mounting surface open (if permitted by local
building codes) or attach the cover plate supplied with the mounting kit.

Touchpanel Mounting

Physical installation of the TPS-6L without a mounting option includes mounting the
unit to the wall and installing a bezel. The only tools required for the procedures
presented here are masking tape (or equivalent), a level, a gypsum board saw (or
equivalent), and a #2 Phillips tip screwdriver. The following procedures are based on
the use of the supplied screws and clips for post-construction installation.
Mounting to the Wall
The TPS-6L is designed to be mounted in a wall or lectern. Two overlay cutout
templates (4504078) are supplied. One is in the shape of the required opening; the
other is similar to a frame, with the inner area of the frame the shape of the required
opening. (Refer to the following diagrams.) Use the template that is most convenient.
Mounting Parts Supplied with the TPS-6L
PART DESCRIPTION
Metal Mounting Clip
Overlay Template Cutout
Connector Plug, Three-pin
Connector Plug, Four-pin
Connector Plug, Five-pin
Screw, #04-40 x 2", Pan Head*
Screw, #6AB x 2-½", Pan Head
* Used for mounting the optional external speaker SPK-6L.
NOTE: The following drawings are not to scale. Do not attempt to use them to
prepare the hole in the mounting surface.
Crestron TPS-6L
PART NUMBER
2014237
4504078
2003575
2003576
2003577
2018793
2014276
Operations & Installation Guide - DOC. 6630A
QUANTITY
4
1
1
1
2
4
4