Mounting Options - Crestron Isys TPS-3100L Operation Manual

6.4" Lectern/Wall Mounted Touchpanel
18 • 6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-3100L
NTSC/PAL Balanced Video Input Pinouts
PIN DESIGNATION
#
1 C(+)
2 C(-)
3 C(S)
4 Y(+)
5 Y(-)
6 Y(S)
NOTE: When sending balanced video from a CNX-BIPAD8 or CNX-PVID device,
only the positive (+) and negative (-) wires are to be connected to the touchpanel. Do
not connect the shield (S) wires.

Mounting Options

The TPS-3100L touchpanel installs simply and cleanly into existing or newly
constructed walls, with an assortment of pre- and post-construction mounting
options. All mounting options are provided separately from the actual touchpanel.
Refer to the table after this paragraph for a complete list of mounting options and
respective Installation Guides for the TPS-3100L.
Mounting Options for the TPS-3100L
PRE-CONSTRUCTION* POST-CONSTRUCTION**
OPTION
Back Box Kit
Pre-Construction Mount
Kit
Mud Mount Kit
(accessory)
Trim Mount Kit
(accessory)
-
-
* Pre-construction refers to framed walls prior to hanging drywall.
** Post-construction refers to framed walls with drywall hung.
NOTE: There is also a rack mount kit for the TPS-3100L (known as
RMK-3100L). Refer to the latest version of the Installation Guide (Doc. 6299) which
is available from the Crestron website (www.crestron.com).
If the BB-3100L or PMK-3100L are to be used and a touchpanel is not available, the
installer can either leave the hole in the mounting surface open (if permitted by local
building codes) or attach the cover plate supplied with the mounting kit.
Crestron Isys
DESCRIPTION
Chrominance
(Positive)
Chrominance
(Negative)
Chrominance
(Shield)
Luminance
(Positive)
Luminance
(Negative)
Luminance
(Shield)
MODEL NUMBER
OPTION
-
- PMK-3100L
- MMK-3100L
- TMK-3100L
Wall Mount Kit – Mud WMKM-3100L
Wall Mount Kit – Trim WMKT-3100L
Operations Guide – DOC. 6291
®
TPS-3100L
DOCUMENT
NUMBER
BB-3100L 6298
6297
6296
6295
6296
6295