Industry Compliance - Crestron MT-1000C Operation Manual

Crestron MT-1000C
Operations Guide – DOC. 6322A
MiniTouch Handheld Wireless Touchpanel
Connectors, Controls & Indicators
CONNECTORS,
# CONTROLS &
INDICATORS
1 VOL
2 CH
3 MUTE
4 INFO
5 Page Back
6 MAIN
7 Page Forward
8 Thumbpad
9 MENU
10 EXIT
11 IR Transmitter Lens
12 Battery charge contacts
13 USB Port
14 Power input port
15 POWER Indicator
16 Battery charge contacts
17 STATUS Indicator

Industry Compliance

As of the date of manufacture, the MT-1000C has been tested and found to comply
with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
MiniTouch Handheld Wireless Touchpanel: MT-1000C • 7
DESCRIPTION
Volume up/down - programmable pushbutton
Channel up/down - programmable pushbutton
Programmable pushbutton
Programmable pushbutton
Moves back one page – programmable pushbutton
Returns to main page - programmable pushbutton
Moves forward one page - programmable pushbutton
Up, down, right, left, and SELECT - programmable
pushbuttons
Programmable pushbutton
Programmable pushbutton
Protective cover over IR emitter
Enable charging of the touchpanel battery
For uploading firmware and touchpanel projects
Connects power supply to docking station
Red LED indicates power applied to docking station
Power source for docked touchpanel
LED is red when battery is charging; blue when
battery is fully charged.