Table of Contents
Advertisement
HNC 47.82
3
Safety
3.1
Proper use
3.2
Training
3.3
Making changes and modifications to the machine
At the time of its development and production, the machine was built in accord-
ance with prevailing technological regulations and therefore conforms to industry
safety standards. However, hazards may arise should the machine be operated
by untrained personnel, used improperly or employed for purposes other than
those it was designed for. The chapter entitled "Safety" offers an overview of all
the important safety considerations necessary to optimise safety and ensure the
safe and trouble-free operation of the machine. To further minimise risks, the other
chapters of this manual contain specific safety instructions, all marked with sym-
bols. Besides the various instructions, there are a number of pictograms, signs and
labels affixed to the machine that must also be heeded. These must be kept visible
and must not be removed.
The machine described in this manual is intended solely for the processing of
wood, synthetic materials, and similar machinable materials. Operational safety
is only guaranteed when the machine is used for the intended purposes.
Any use, other than that of the machine's intended purpose shall
be considered improper and is therefore not permitted. All claims
regarding damage resulting from improper use that are made
against the manufacturer and its authorised representatives will be
rejected. The operator is solely liable for any damage that results
from improper use of the machine.
The term "proper use" also refers to correctly observing the operating conditions
as well as the specifications and instructions in this manual. The machine may
only be operated with parts and accessories recommended by the manufacturer.
The machine described in this manual is intended solely for private sector use and
for individual or small production series in the commercial sector.
All those appointed to work on or with the machine must have fully read and
understood the manual before commencing any work. This requirement must be
met even if the appointed person is familiar with the operation of such a machine
or a similar one, or has been trained by the manufacturer. Knowledge about the
contents of this manual is a prerequisite for protecting personnel from hazards
and avoiding mistakes so that the machine may be operated in a safe and trouble
free manner. It is recommended that the operator requests proof from the per-
sonnel that the contents of the manual have been read and understood.
In order to minimise risks and to ensure optimal performance, it is strictly pro-
hibited to alter, retrofit or modify the machine in any way without the express con-
sent of the manufacturer. All the pictograms, signs and labels affixed to the
machine must be kept visible, readable and may not be removed. Pictograms,
signs and labels that have become damaged or unreadable must be replaced
promptly.
Safety
7
Advertisement
Table of Contents
