Felder Hammer HNC 47.82 Translation Of The Original Operating Instructions page 52

Maintenance
52
Fig. 27: Lubricate Z-axis
1 Z-axis
1.
Move the Z-axis into the highest position.
2.
Switch off the machine at the main switch, disconnect the power supply.
3.
Remove the router motor and extraction.
4.
Unscrew the spindle holder.
5.
Loosen both cover screws.
6.
Loosen both cable guides which are on top of the machine head and
remove the Z-axis cover.
7.
Move the cover upwards and away.
8.
Move the Z-axis downwards on the drive wheel of the belt.
1