Noise Level - Felder Hammer HNC 47.82 Translation Of The Original Operating Instructions

HNC 47.82
Reference point
5.1

Noise level

3
Fig. 5: Reference point
1 X-axis
2 Y-axis
3 Machine zero point
4 Reference point
5 Front of the machine
The machine zero point is situated at the rear, left hand corner (connections for
PC, emergency stop, etc. are at the front). The reference point is at X: 798 mm
and Y: 449 mm
X-axis
Positive limit 825.00
Negative limit 0.00
Reference point 798.00
See separate operating manual for the tool mounted.
CAUTION
High noise emission due to blunt tools and incorrect rotation speed
Permanent hearing damage
− Use well sharpened tools and correct rotation speeds.
− Ear protection must always be worn; such protection however,
cannot be considered a substitute for correctly sharpened
tools.
1
4
Y-axis
479.00
0.00
449.00
Technology Data
2
5
Z-axis
160.00
0.00
160.00
19