Declaration Of Conformity - Felder Hammer HNC 47.82 Translation Of The Original Operating Instructions

Declaration of Conformity

4 Declaration of Conformity
Declaration of Conformity
Manufacturer
Product designation
Make
Model Type
The following EC guidelines were applied
12
EG-Declaration of Conformity according to Machine Guidelines 2006/42/EG
We hereby declare that the machine indicated below, which corresponds to the
design and construction of the model we placed on the market, conforms with the
health and safety requirements as stated by the EC guidelines (see table). The
machine number of this machine will be printed on the cover sheet of this oper-
ating manual.
This EC Declaration of Conformity is valid only if the CE label has been affixed to
the machine. Modifying or altering the machine without the express written agree-
ment of the manufacturer shall render the warranty null and void. The signatory of
this statement is the appointed agent for the compilation of the technical informa-
tion.
Prof. h.c. Ing. Johann Georg Felder
CEO Felder KG
KR-Felder-Straße 1, A-6060 HALL in Tirol
HALL in Tirol, 1.1.2020
Felder KG
KR-Felder-Straße 1
6060 Hall in Tirol
CNC portal machine
Hammer
HNC 47.82
2006/42/EG
2014/30/EU