Setup and installation
8.5
Attach the mounting plate for the router motor using screws
28
●
Provide sufficient light at the workstation.
●
Sufficient clearance or screening from neighbouring workstations.
●
Set the levelling feet and then check that the machine is level using a spirit
level. All 4 of the adjustable feet must sit flush to the floor.
Fig. 10: Levelling feet
1
Levelling feet
Accuracy:
In order to be able to achieve the accuracy stated, the machine
must be placed on a stable concrete floor.
The mounting plate is delivered already pre-mounted. If it is has to be removed or
moved then refer to the individual assembly instructions.
1