Table of Contents
Advertisement
Technology Data
Inner dimensions of the portal & other dimensions
Accuracy
14
Data
Clearance width
Clearance height
Table surface
T grooves in the table
Tool chucks (standard)
Data
Technical resolution in 1/8 step mode
Repeatability
Reverse backlash
Torsional stiffness (150N) X,Y,Z
Note:
In order to achieve these levels of accuracy, all of the technolog-
ical parameters need to be correctly selected. Incorrect parame-
ters lead to poor results. The stated performance of the machine
can only be achieved through the use of the Eding Controller and
software. If using other controllers and software, the performance
of the machine may be reduced.
Value
625 mm
160 mm
1005 mm x 574 mm
17.5mm x 7.5 mm for M8
Ø 43 mm
Value
0.00375 mm
±0.05 mm
±0.1 mm
0.1 mm
Advertisement
Table of Contents
