Table of Contents
Advertisement
Setup and installation
8
Setup and installation
8.1
Safety instructions
8.2
Video tutorial
26
WARNING
Improper setup and installation
Severe injuries and damage to property
−
Work may only be carried out by authorised, trained per-
sonnel who are familiar with how to operate the machine and
are in strict observance of all safety instructions.
−
Only assemble and install the machine if the machine and all
of the parts are complete and intact.
●
Before setup and installation, inspect the machine to ensure that it is com-
plete and in technically good condition.
●
Keep the work area orderly and clean. Components and tools that are not
put in their correct place or put away could cause accidents!
●
Ensure that there is sufficient space to work around the machine.
Force-actuated workpieces could be a hazard when processing. Keep suffi-
cient distance from walls, machines and fixed objects.
●
Install the safety equipment according to the instructions and check that they
function properly.
●
The foundation must comply with the norms stipulated in the technical lay-
outs.
●
The foundation must be non-slip.
●
Load bearing ability, finish and surface must remain as they are, perma-
nently.
●
The working area must be adequately lit.
●
Temperature range: 10°C to 40°C with an average value of max.
35°C/24h
●
Humidity: max. 95 % non-wetting
Scan the QR code and watch the video instructions.
Or alternatively you can use this link: http://fg.am/hncfirststeps
Advertisement
Table of Contents
