Table of Contents
Advertisement
HNC 47.82
Mains connection machine
Mains connection machine head
1
Fig. 13: Machine connections at the rear
1
Main switch
2
Mains connection C14
3
Rotation speed control (0-10 volts) (not with HF motors)
4
Connection for the machine head (not with HF motors)
5
Extraction/cable guides
Connect the machine using the C13 plug at the rear of the machine to the power
supply.
The tool (router motor) is connected to the machine head. The voltage is the same
as the input voltage of the machine.
1.
Connect the router motor using the power cable to the plug on the machine
head.
2.
Connect the optional rotation speed control.
3.
Fix the cable to the guide on the machine head (using a cable tie or sim-
ilar).
3
2
Setup and installation
5
4
31
Advertisement
Table of Contents
