Table of Contents
Advertisement
HNC 47.82
8.8
Software
Download / Installation
8.8.1
Connection to external software
$&1
;6
Fig. 16: Pin assignment (details see wiring diagram)
1.
Download the Eding CNC Software and instruction manual from the manu-
facturer (⮫ https://www.edingcnc.com/).
2.
Install the Eding CNC software on to the PC following the manufacturers
instruction manual.
3.
Download configuration file (⮫ http://fg.am/hncini).
4.
Extract Zip folder.
5.
Replace "cnc.ini" and "Spindle-0-pwmCompTable.txt" in the installation
directory (C:\CNC4.03 is the default).
If another software other than Eding CNC and as such a different controller is to
be used, then the following parameters in the software can be set. This informa-
tion is to be treated as a recommendation and not as a guarantee that the
machine will function correctly with a different controller. Additional parameters:
⮫ Chapter 5 'Technology Data' on page 13
Note:
The stated performance of the machine can only be achieved
through the use of the Eding Controller and software. If using
other controllers and software, the performance of the machine
may be reduced.
Setup and installation
33
Advertisement
Table of Contents
