Router Motor Hfm 1000 - Felder Hammer HNC 47.82 Translation Of The Original Operating Instructions

Adjustments and tool changes
Tighten the router tool in place
9.3.3

Router motor HFM 1000

38
1
2
Fig. 19: HF spindle: Clamp tool in place
1 Fix the spindle
2 Sleeve nut
Tool:
●Router tooling
●Spanner 22 mm
●Collet chuck key
1.
Insert the collet chuck into the sleeve nut.
2.
Insert the router tool and move it until it reaches the stop in the tool socket.
3.
Then tighten the spindle with the respective spanner (22 mm).
4.
Tighten the locking nut and check that the router tool is inserted correctly.
WARNING
Flying tools
Severe injuries and damage to property
−
Clamp tools with the appropriate operating tool and torque.
See operating manual.