Table of Contents
Advertisement
HNC 47.82
9.3.2
HF-motor (optional)
Length
Width
Height
Material
WARNING
Collision danger and risk of cutting
Severe injuries caused by rotating tools
−
Adjustments to the machine or changing the tools may only be
done once the machine has stopped.
−
Beware of any possible collisions with stops and workpieces.
WARNING
Hand injuries
Risk of injury due to sharp or hot tools
−
Adjustments to the machine or changing the tools may only be
done once the machine has stopped.
−
Wear protective gloves. Tools can become hot when being
used. Tools can have sharp edges.
NOTICE
Sleeve nut, collet chuck, thread and router tool must all be free of
contaminants.
Adjustments and tool changes
Dimensions
1500 mm
1000 mm
800 mm
MDF, 19 mm
37
Advertisement
Table of Contents
