Automatic Programmes - Progress PCD46102X User Manual

signal sounds for 2 minutes. The display
shows flashing
The oven turns off automatically.
8. Press a sensor field to stop the signal.
9. Turn off the oven.
When the Time Delay function
is turned on, the display shows
a symbol of the heating
function,
The dot shows which clock
function is on in the Clock /
residual heat display.
Setting: Set + Go
You can use the Set + Go function only
when the Duration is set.
1. Set a heating function and
temperature.
2. Set the Duration.
3. Press again and again until the
display shows flashing
4. Press to set the Set + Go function.
The display shows
indicator. This indicator shows which clock
function is activated.

AUTOMATIC PROGRAMMES

WARNING! Refer to Safety
chapters.
There are 25 automatic programmes. Use
an automatic programme or recipe when
you do not have the knowledge or
experience on how to prepare a dish. The
display shows the default cooking times
for all automatic programmes.
Automatic programmes
Programme
1 VEGETABLES, TRADITIONAL
2 POTATO GRATIN
3 FARMER BREAD
and the time setting .
with a dot and
.
and with an
5. Press a sensor field (apart from ON /
OFF) to start the Set + Go function.
Setting: Minute Minder
1. Press
The display shows flashing
2. Press
First you set the seconds, then the
.
minutes and the hours.
3. Press
Minder and
4. Press
automatically after 5 seconds.
When the set time ends, the signal sounds
for 2 minutes and the display shows
flashing 00:00 and
5. Press a sensor field to stop the signal.
Setting: Count Up Timer
1. To reset the Count Up Timer press:
again and again until display shows
flashing
2. Press and hold:
shows "00:00" the Count Up Timer
starts to count up again.
4
5
6
7
8
9
10
11
12
13
.
to switch between options.
or to set the Minute
to confirm.
or the Minute Minder starts
.
.
. When the display
Programme
ROLLS
FISH
POACHED FISH (TROUT)
PLUM DUMPLING
VEAL KNUCKLE
RICE
LASAGNE
DOUGH PROVING
ROAST BEEF
ROAST PORK
Progress 15
and "00".