Table of Contents
Advertisement
12 Progress
5. Deactivate the appliance.
Setting: Set + Go
You can use the Set + Go function only
when the Duration is set.
1. Set a heating function and
temperature.
2. Set the Duration.
3. Press
again and again until the
display shows flashing
4. Press
to set the Set + Go function.
The display shows
indicator. This indicator shows which clock
function is activated.
5. Press a sensor field (apart from ON /
OFF) to start the Set + Go function.
Setting the MINUTE MINDER
Use the MINUTE MINDER to set a
countdown (maximum 2 h 30 min). This
function has no effect on the operation of
the oven. You can set the MINUTE
MINDER at any time and also when the
appliance is off.
1. Touch
.
and "00" flash in the display.
AUTOMATIC PROGRAMMES
WARNING! Refer to Safety
chapters.
There are 9 automatic programmes. Use
an automatic programme or recipe when
you do not have the knowledge or
experience on how to prepare a dish. The
display shows the shelf position and the
default cooking times for all automatic
programmes.
Automatic programmes
Programme
1
ROAST BEEF
2
ROAST PORK
3
CHICKEN, WHOLE
.
and
with an
2. Use
or
to set the MINUTE
MINDER. First you set the seconds,
then the minutes and the hours.
3. Touch
or the MINUTE MINDER
starts automatically after five seconds.
When the set time ends, an acoustic
signal sounds for two minutes and 00:00
and
flash in the display.
4. Touch a sensor field or open the oven
door to stop the acoustic signal.
Setting the Time delay function
The DURATION
used at the same time, if the appliance is
to be switched on and off automatically
later. In this case, first set the DURATION
and then the END
"Setting the DURATION" and "Setting the
END" ).
When the Time delay function
is activated, the display shows
a static symbol of the oven
function,
The dot shows which clock
function is on in the Clock /
residual heat display.
Programme
4
PIZZA
5
MUFFINS
6
QUICHE LORRAINE
7
WHITE BREAD
8
POTATO GRATIN
9
LASAGNE
Automatic programmes
1. Activate the appliance.
2. Touch
.
and END
can be
function (refer to
with a dot and
.
Advertisement
Table of Contents
