Automatic Programmes - Progress PHP5325X User Manual

Table of Contents

Advertisement

Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1. Set an oven function (or a programme)
and temperature (refer to "Setting the
oven function" and "Changing the
temperature").
2. Set the DURATION (refer to "Setting the
DURATION").
3. Touch
again and again until
flashes in the display.
4. Touch
to set the SET+GO function.
The display shows
indicator. This indicator shows which clock
function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
Setting the MINUTE MINDER
Use the MINUTE MINDER to set a
countdown (maximum 2 h 30 min). This
function has no effect on the operation of
the oven. You can set the MINUTE MINDER
at any time and also when the appliance is
off.
1. Touch
.

AUTOMATIC PROGRAMMES

WARNING! Refer to Safety
chapters.
There are 20 automatic programmes. Use
an automatic programme or recipe when
you do not have the knowledge or
Automatic programmes
Programme number
1
2
3
4
5
and
with an
Programme name
BRAISED MEAT
ROAST PORK
ROAST VEAL
ROAST LAMB
ROAST GAME
and "00" flash in the display.
2. Use
or
to set the MINUTE
MINDER. First you set the seconds,
then the minutes and the hours.
3. Touch
or the MINUTE MINDER
starts automatically after five seconds.
When the set time ends, an acoustic signal
sounds for two minutes and 00:00 and
flash in the display.
4. Touch a sensor field or open the oven
door to stop the acoustic signal.
Setting the Time delay function
The DURATION
used at the same time, if the appliance is to
be switched on and off automatically later.
In this case, first set the DURATION
then the END
function (refer to "Setting
the DURATION" and "Setting the END" ).
When the Time delay function is
activated, the display shows a
static symbol of the oven
function,
The dot shows which clock
function is on in the Clock /
residual heat display.
experience on how to prepare a dish. The
display shows the shelf position and the
default cooking times for all automatic
programmes.
Progress 13
and END
can be
with a dot and
.
and

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PHP5325X and is the answer not in the manual?

Table of Contents