Planning Information - Commend C-G8-TEL Product Manual

G8-TEL, G3-TEL

Planning Information

The digital telephone interfaces G3-TEL (for GE 300) and G8-TEL (for GE 800) can be used for the fol-
lowing functions:
Auto Dialler Mode
The auto dialler mode is used for transfer of call requests or input messages (central control calls)
into the public telephone net.
The telephone numbers to be dialled can be configured as desired.
As information for the calling station and for the called telephone, different voice messages can
be switched on.
It is also possible to dial from any telephone into the Intercom Server; Intercom functions can be
carried out with the DTMF keyboard of the telephone.
PABX Mode see page 25
After the number of the telephone interface has been dialled, any desired telephone number in
the telephone network can be called
For any telephone in the telephone network it is possible, to dial into the Intercom Server by dial-
ling the call number of the telephone interface; Intercom functions can be carried out with the
DTMF keyboard of the telephone.
1.0/0609
see page 10
G8-TEL
Auto Dialler
Mode
GE 300
GE 800
PABX
Mode
SOS
G3-TEL
PSTN
PSTN
Planning Information
5