Recording Of Speech Storage At The Station - Commend C-G8-TEL Product Manual

Auto Dialler Mode

Recording of Speech Storage at the Station

Speech storage messages
com station.
The recording can be performed in normal operation, so the speech storage messages can be tested
immediately.
Configuration CCT 800
At Subscriber – Attendant contacts configure the code "99TT" as PA-code for the telephone in-
terface – a dummy contact is required.
For a detailed description of the configuration of an PA-attendant contact
Recording of Messages
1. Starting Recording mode
dial 99TT at any Intercom station
2. Loading the speech message to be re-recorded
001 to 127 (3-digit message number)
3 load the standard message
3. Recording new message
T keep pressed for recording a new message, 0 for listening
4. Saving the recorded message
1 save the recorded message or
X cancel without saving
2 load a recorded message that has already been saved with 1
4 previous message
6 next message
Attention:
Loading of a new playlist
sages recorded with function "99TT"!
24
(see "Standard Speech Messages" on page
(see "Download / Upload of Playlists" on page
G8-TEL, G3-TEL
18) can be recorded at the Inter-
see page 28.
23) deletes all recorded mes-
1.0/0609