Answering A Call - Escene SayHi 320 Series User Manual

speakerphone
Place a call using a
headset
Redial
Dial from a call log
Place a call while
Another call is active
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and then go
off-hook by lifting the handset or pressing
• If you make a mistake while dialing, press C button to erase digits.

4.2 Answering a Call

You can answer a call by simply lifting the handset, or you can use other options if they are
available on SayHi IP Phone .
If you want to...
Answer with a
handset
Answer with the
speakerphone
(Non-headset
Escene Communication
or Programmable buttons
Put on your headset and active
Headset button, and then do as
using speakerphone
--Press REDIAL button to dial the last number
-or press Navigation button-Right > "Dialed number", select a
number, and press
--1) Press MENU or OK button
"Missed calls", "Received calls" and "Dialed numbers",
- or press Navigation button (in Standby interface) > select
"Missed calls" (down), "Received calls" (left) and "Dialed
numbers" (right) )；
--2) Then press
--1) Press Hold button or soft key
--2) Press again the line one or the other line , you can enter another
number;
--3) Press '#' button (default) ;
-or press
--1) Your phone ring;
--2) Line button of the ringing
line is Red and flashing,
Light strip is Red
and flashing；
--4) Press '#' button（default) ,
-or press
-or wait 5s (default), then it send
the number automatically.
"Call history", you can select
>
button.
;
to send the number.
, Headset or Speaker button.
Then...
--Pick up the handset
--Press Speaker button
-or press the flashing
;
Line button,
www.escene.cn/en/ 14