Keypad Instruction; Sip Account Settings - Escene SayHi 320 Series User Manual

6.Keypad Instruction

SayHi series IP phones are can be configured in two ways. The first you can use the phone keypad
where you can settings for you IP phones, the other you can log in to User Options web pages
where you can settings for you IP phones.
Use phone keypad to setting. Press MENU or OK button to the main menu, Use the navigation
keys to select menu, press OK button to confirm menu selections, press
information.

6.1 SIP Account Settings

320/330 series IP phone make calls based on sip accounts, 320/330 series IP phones can support 2
or 3 independent SIP account, each account can be configured to different SIP server.
If you want to...
Create an SIP account
Escene Communication
--1) Select "System setting" > "Advanced setting"；
--2) Enter the password required（The default is empty) ；
--3) Select "SIP" > "Account sip"；
--4) Select one of the account you want to setting, you can configure the
following parameters
-Enable account*: Select Enable
-Display Name: The name displayed on the screen
-User Name*: the account matched with the SIP server.（extension
number) ,
-Authen usr: the Authenticated users matched with the SIP server.
（The default With the same account)
-user pwd*: the user password matched with the SIP server
-Description: description of this account,
-SIP1*: the primary SIP server, By default all calls through the
server,
-SIP2: the secondary SIP , When the primary server is
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value is
20 The default value is 3600.
Then...
www.escene.cn/en/
to delete input