Overview Keypad; Standard Display - Proceq hygropin Operating Instructions Manual

3.3 Overview Keypad

ON / OFF
MENU
UP
DOWN
ENTER

3.4 Standard Display

Depending on the settings the Hygropin is able to display:
• relative humidity and temperature measured by two probes
• calculate psychrometric parameters like dew / frost point etc. for both probes
• difference between the values measured by the two probes
Press slightly button to turn the Hygropin on:
Trend Indicator
increasing value
decreasing value
stable value
Data Logging
Logging for Probe 1
is active.
Change probe that is displayed or scroll through the measuring values using the
button.
By pressing the temperature and humidity values of the selected probe are stored. More
information can be found in the Data Capture chapter.
Enter the Menus and Settings screens by pressing the
© by Proceq SA
Turns the instrument "on" or "off".
Activates the internal menu. Press this key again to go back.
Change data displayed, navigate through menu, make a
selection or change values.
Confirm a selection and data capture.
Probe selected
Humidity and
Temperature
Date and Time
Battery charge indicator
key:
or
5