Table of Contents
Advertisement
The fact that this information is saved is evidenced by a triple blinking on the LCD of
the radiometer of the measurement result being saved, and return of the radiometer to the
mode of display of the measured characteristics of ionizing radiation.
Important! If the submode of measurement result saving is paused for more than 30
seconds (i.e., the user presses no buttons of the radiometer), the latter automatically returns
to the mode of display of the measured ionizing radiation characteristics without saving
the measurement result.
2.3.3.7 Measurement of beta radiation characteristics.
2.3.3.7.1 To measure characteristics of beta radiation, the radiometer should work in
the mode of the measured ionizing radiation characteristics display.
After turning on the radiometer starts working in this mode. This mode can be
entered from any other operating mode of the radiometer with the help of a short press
of MODE button.
2.3.3.7.2 Shortly press γ/β/α button to select "β" as the type of radiation. Symbols
"β" and "γ" will be displayed on the LCD of the radiometer.
70
Advertisement
Table of Contents
