Table of Contents
Advertisement
If the nonvolatile memory has no saved measurement results, a short press of
MODE button switches the radiometer from the mode of data communications
control with the PC directly to the mode of measured ionizing radiation
characteristics display (the measured characteristic and the type of radiation do not
change).
A short or a long press of THRESHOLD button in any operating mode of the
radiometer changes the submodes of this operating mode.
Note. After switching the radiometer from the mode of measured ionizing
radiation characteristics display to any other mode, the selected characteristic of the
selected radiation type continues to be measured. When the measurement result of
the alarm threshold level is exceeded, the radiometer returns to the mode of
measured ionizing radiation characteristics display and begins to generate light and
sound alarms.
A detailed description of each operating mode of the radiometer with its
submodes is given below.
48
Advertisement
Table of Contents
