ECOTEST STORA-ABG RKS-01 Operating Manual page 68

Note. A zero value of the threshold level makes the alarm inactive.
2.3.3.6.25 To save the measurement result in the nonvolatile memory, shortly
press SAVE button in the mode of displaying the measured characteristics of
ionizing radiation. The radiometer will switch to the submode of measurement
result saving. "Arch" (2) characters on the LCD of the radiometer are the indication
of this submode (Figure 2.8).
2.3.3.6.26 If "FULL" characters are displayed on the LCD of the radiometer
after you press SAVE button (Figure 2.7), there is no free space in the nonvolatile
memory of the radiometer, and, correspondingly, the next measurement results
cannot be saved.
2.3.3.6.27 To clear space in the nonvolatile memory, delete its saved
measurement results. Measurement results can be cleared during data
communications with the PC (2.3.3.11 of the OM) or in the mode of measurements
results viewing (2.3.3.12 of the OM).
66