Table of Contents
Advertisement
In this mode, a short press of γ/β/α button causes a change of ionizing radiation
type, which characteristics will be measured. Symbols of measured radiation are
displayed on the LCD of the radiometer as characters "γ", "β", "α". If several
characters are displayed simultaneously, it means that characteristics of several
radiation types are measured at the same time.
The display of one symbol informs that characteristics of only one type of
radiation are measured and the influence of other types of radiation is considered
and subtracted from the current measurement results.
A long press of γ/β/α button (for 2 s) leads to saving of the current measurement
result as a radiation component, which will further be subtracted from the results of
subsequent measurements. The next long press of γ/β/α button (for 2 s) leads to
resetting this previously saved value.
Short presses of MODE button switches the radiometer from one mode to
another in the following order:
46
Advertisement
Table of Contents
