2.3.3.10 Alarm clock mode
This mode can be entered from any other operating mode of the radiometer with
the help of a short press of MODE button. This mode follows the clock mode.
In the mode of alarm clock, the radiometer's LCD displays the following
information (Figure 2.15):
- alarm clock symbol (1) (if the alarm clock is on);
- battery status symbol (2);
- time of the alarm clock triggering (3);
- current time (4).
To proceed to the submode of programming of the alarm clock triggering time,
press and hold THRESHOLD button until a stripe (1) "moving" across the
instantaneous value indicator appears on the LCD, and the minute digits of alarm
clock triggering (2) start blinking (Figure 2.16).
90