ECOTEST STORA-ABG RKS-01 Operating Manual page 71

The nonvolatile memory status is displayed on the instantaneous value indicator
(4). If the nonvolatile memory contains no data, only the first segment is
highlighted on the indicator. If the memory is full, all segments are highlighted.
2.3.3.6.29 The low-order digit of the object number is blinking and shows that
its value can be programmed. Use THRESHOLD button to set the required value of
the blinking digit. Successive short presses and releases of THRESHOLD button
change this value per unit. A long press of THRESHOLD button starts automatic
change of this value, which stops after the button is released.
A short press of MODE button saves the value of the digit (it stops blinking)
and allows changing the value of the next digit, which starts blinking at that. All
other digits are programmed likewise.
2.3.3.6.30 As soon as the required digits of the measurement object number are
programmed, a short press of SAVE button saves the measurement result, the
measurement object number and the time and date of measurement in the
nonvolatile memory.
69