Table of Contents
Advertisement
Programming a new value of the specified limit of statistical deviations in done
in a similar way to programming of the new value of alarm threshold level and
finishes after programming of all digits or after pressing "SAVE" button. By
presetting a zero value, you switch on automatic determination by the radiometer of
the specified limit of statistical deviations depending on the radiation intensity.
2.3.3.6.24 As soon as the alarm threshold level and the specified limit of
statistical deviations are programmed, their values blink three times on the LCD. It
means they are saved in the nonvolatile memory of the radiometer. After that, the
radiometer returns to the mode of displaying the measured characteristics of
ionizing radiation.
Important! If the submode of programming the new values of the alarm
threshold level and the specified limits of statistical deviations and switching on/off
sounding of registered gamma quanta is paused for more than 30 seconds (i.e., the
user presses no buttons of the radiometer), the latter automatically returns to the
mode of photon-ionizing radiation DER measurement. All changes made in the
submode of new values programming will be canceled.
65
Advertisement
Table of Contents
