Table of Contents
Advertisement
Table 2.2 (continued)
Trouble
Not all segments of the
LCD are highlighted
during the test of
display and signaling
means when the
radiometer is turned on.
Low battery indication
is displayed on the
LCD after the batteries
have been replaced
Probable cause
LCD failure
1 Poor contact between
the batteries and the
battery compartment
clamps
2 One of the batteries is
out of order
38
Troubleshooting
Send the radiometer for
repair to the
manufacturer
1 Clean out the contacts
on the clamps and the
batteries
2 Replace the defected
battery
Advertisement
Table of Contents
