Table of Contents
Advertisement
During data communications, the radiometer can operate in the mode of IDU.
The radiometer sends to the PC the following:
- current measurement results of photon-ionizing radiation DER or surface beta-
particles flux density;
- current value of supply voltage, as well as receives the commands from the PC
to change the measurement modes and synchronize time according to the PC clock.
"Er03", "Er04", "Er05", "Er06" or "Er07" symbols appear on the LCD if errors
occur during data communications with the PC. A short press of MODE button
returns the radiometer to the mode of data communications control with the PC.
Press shortly MODE button of the radiometer to stop the process of connecting
to the PC. "PC" symbols on the LCD stop blinking at that. If the connection with
the PC is established, the data communications with the PC can be stopped only
with the help of the controls of the custom-made software („Rad Reader").
100
Advertisement
Table of Contents
