Setting The System Manager Id - Canon LBP253 Series User Manual

Table of Contents

Advertisement

Setting the System Manager ID

This is a PIN for using the Remote UI. Only users who know the PIN can access the Remote UI. You can also set a PIN
for the System Manager ID. If this ID is enabled, you can access <Network Settings> and <System Management
Settings> only when the System Manager ID and PIN have been entered correctly. The System Manager ID settings
information is critical to the security of the machine, so make sure that only Administrators know the System Manager
ID and PIN.
The factory default settings of the System Management ID and PIN are both "7654321." Note that it is not
preferable to use these values as they are, from the viewpoint of security. It is recommended that you change
the values by using the following procedure.
1
Tap <Menu> in the Home screen.
2
Tap <System Management Settings>.
If the System Manager ID has already been set
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press
Logging on to the Machine(P. 36)
3
Select <System Manager Information Settings>
4
Specify the System Manager ID and PIN.
Specify the <System Manager ID>, and then specify the <System Manager PIN>.
Enter a number of up to seven digits using the numeric keys, and tap <Apply>.
When <PIN (Confirm)> is displayed, enter the PIN once again to confirm.
You cannot register an ID or PIN that consists only of zeros, such as "00" or "0000000".
To cancel the System Manager ID and PIN settings, clear the information you entered in
<Apply> with the fields blank.
Setting the System Manager Name
1
Tap <System Manager Name>.
Security
<System Manager ID and PIN>.
226
0U6X-089
.
and tap

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents