Chapter 1
Purpose of this Manual
This manual is for designers of systems based on the CoreModule
manual contains information that permits designers to create an embedded system based on specific design
requirements.
Information provided in this reference manual includes:
•
Product Overview
•
Hardware Specifications
•
BIOS Setup information
•
Technical Support Contact Information
Information not provided in this reference manual includes:
•
Detailed chip specifications
•
Internal component operation
•
Internal registers or signal operations
•
Bus or signal timing for industry standard busses and signals
•
Pinout definitions for industry standard interfaces
References
The following list of references may help you successfully complete your custom design.
Specifications
•
PC/104 Specification, Revision 2.5, November, 2003
•
PC/104-Plus Specification, Revision 2.0, November, 2003
For latest revision of the PC/104 specifications, contact the PC/104 Consortium, at:
Web site:
http://www.pc104.org
•
PCI 2.3 Compliant Specifications, Revision 2.3, March 29, 2002
For latest revision of the PCI specifications, contact the PCI Special Interest Group at:
Web site:
http://www.pcisig.com
•
AMI BIOS Core 8 User's Guide
Web site:
http://www.ami.com/support/doc/MAN-EZP-80.pdf
Chip Specifications
The following integrated circuits (ICs) are used in the CoreModule 745 single board computer:
•
Intel Corporation and the Atom™ N400 and D500 series processors
Web site:
http://www.intel.com/p/en_US/embedded/hwsw/hardware/atom-400-500/hardware
•
Intel Corporation and the ICH8-M chip, used for the I/O Hub (Southbridge)
Data sheet:
http://www.intel.com/assets/pdf/datasheet/313056.pdf
•
SMSC and the Super I/O SCH3112I-NU chip used for the Super I/O controller
Data sheet:
http://www.smsc.com/media/Downloads_Public/Data_Briefs/311xdb.pdf
CoreModule 745
About This Manual
Reference Manual
®
745 Single Board Computer (SBC). This
1
Need help?
Do you have a question about the CoreModule 745 and is the answer not in the manual?