User-Defined Programmes - CARDIOSTRONG TX20 Assembly And Operating Instructions Manual

3.4.4

User-Defined Programmes

A total of three user-defined programmes (U01-U03) are available. Within these user-defined
programmes you have the option of customising 20 individual segments to suit your personal
requirements.
1. To reach the desired user-defined programme, press the PROGRAM button.
The training time is displayed.
Set the desired training time with the ▲▼ buttons on the upper keypad.
2.
3. To set the incline and speed values for the first segment, press and hold the PROGRAM button
for about 3 seconds.
The display shows S-01.
4. To set the incline and speed values, use the ▲▼ buttons for incline and speed on the lower
keypad.
5. To set the next segments, follow the procedure described in steps 3 and 4.
After setting the values of the 20th segment, the display will begin to ask for the training time again.
The values of the individual segments are stored.
6. To start the programme, press the START button.
NOTICE
L
You can make adjustments to the incline and speed.
When the training time expires, a countdown will appear on the display and the treadmill will stop slowly.
7. To pause the programme, press the STOP button.
8. To resume the programme, press the START button.
9. To end the programme, press the STOP button again in the paused programme.
24
TX20