CARDIOSTRONG TX20 Assembly And Operating Instructions Manual page 15

Step 2: Assembly of the console unit
1. Connect the cable (18) with the cable of the cable (82) of the console.
2. Mount the console on both columns using each three bolts (70), three spring washers (7) and
three washers (8).
3. Tighten all bolts.
Step 3: Assembly of the covers
1. Mount the covers (54 & 55) to the main frame and the columns using each two screws (56).
2. Carefully remove the screw (65) from the transportation plate (63).
࣑ ATTENTION
The transportation plate is used to prevent the tradmill from unintentionally folding up during
transport. To use the folding mechanism, the transportation plate must be removed.
NOTICE
L
Keep the screw (64) of the transportation plate for later transport. For details on transporting
the devise, see chapter 4.
2
63
15