Switching On The Treadmill; Programmes; Manual Programme - Quick Start - CARDIOSTRONG TX20 Assembly And Operating Instructions Manual

3.3

Switching on the Treadmill

Switch the power switch on the back of the unit to "I" and make sure that the safety key is correctly
positioned on the console.
The display will light up for 2 seconds and the console will give a signal.
The console is in manual programme.
After 10 minutes of inactivity, the console will automatically go into sleep mode.
3.4

Programmes

There are a total of 21 programmes available for you:
+ Manual programme (quick start): 1
+ Target programme: 3
+ Pre-set programmes: 12
+ Heart rate controlled programmes: 2
+ User-defined programmes: 3
3.4.1

Manual Programme - Quick Start

After switching on the treadmill, you will be in the manual programme.
1. To start the programme directly, press the START button.
The treadmill will start at a speed of 0.8 km/h.
All values will count up.
NOTICE
L
You can make adjustments to the incline and speed.
2. To pause the programme, press the STOP button.
3. To resume the programme, press the START button.
4. To end the programme, press the STOP button again in the paused programme.
20
TX20