CARDIOSTRONG TX20 Assembly And Operating Instructions Manual
For more information, please visit cardiostrong.com, sport-tiedje.com
Related Manuals for CARDIOSTRONG TX20
Summary of Contents for CARDIOSTRONG TX20
- Page 1 Assembly and Operating Instructions max. 110 kg ~ 60 Min. 75 kg L 167.6 | W 77.7 | H 135.2 CSTTX20.01.01 Art. No. CST-TX20 Treadmill TX20...
- Page 2 TX20...
- Page 3 Train at home no matter what the weather or time of the day. cardiostrong fitness equipment offers training programmes and a variety of equipment for all training levels and all training goals. Further information can be found at www.sport-tiedje.com or www.cardiostrong.de.
-
Page 4: Table Of Contents
Transportation Wheels Transportation Plate TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions Faults and Fault Diagnosis Error Codes and Troubleshooting Care and Maintenance 5.4.1 Adjusting the Running Mat 5.4.2 Re-tensioning the Running Mat 5.4.3 Lubricating the Running Mat Maintenance and Inspection Calendar TX20... - Page 5 DISPOSAL RECOMMENDED ACCESSORIES ORDERING SPARE PARTS Serial Number and Model Name Parts List Exploded Drawing WARRANTY CONTACT...
- Page 6 This notice indicates potentially hazardous situations which, if not avoided, will result in death or serious injuries! NOTICE This notice indicates further useful information. Retain these instructions in a safe place for future reference, maintenance or when ordering replacement parts. TX20...
-
Page 7: General Information
GENERAL INFORMATION Technical Data LCD - Display of: Training time in minutes Speed in km/h Training distance in km Calories in kcal Incline Heart rate (when using the hand pulse sensors or a chest strap) Programmes in total: Manual programme (Quick Start): Target programmes: Pre-set programmes: Heart rate controlled programmes:... -
Page 8: Personal Safety
Make sure that nobody is within the range of motion of the equipment during training so as not to endanger you or other persons. ࣑ ATTENTION Do not insert any objects of any kind into the openings of the device. TX20... -
Page 9: Electrical Safety
Electrical Safety ⚠ DANGER In order to reduce the risk of an electric shock, always unplug the equipment from the mains socket immediately after your workout, before assembly or dismantling, and before maintenance or cleaning. Do not pull on the cable. ⚠... -
Page 10: Set-Up Place
(over 70%) like swimming pools. A floor protective mat/equipment underlay can help to protect high-quality floor coverings (parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight unevenness. Recommended free zone: TX20... -
Page 11: Assembly
ASSEMBLY General Instructions ⚠ DANGER Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suffocation for children. Keep children away from the equipment during assembly. ⚠ WARNING The treadmill is equipped with high- pressure shock absorbers that can cause the treadmill to suddenly open if handled... -
Page 12: Scope Of Delivery
In the event of complaints, the contractual partner must be contacted directly. ⚠ CAUTION If parts of the scope of delivery are missing or damaged, the assembly must not be carried out. Main frame Console unit Cover Upright columns Safety key Silicone oil TX20... -
Page 13: Overview
Overview... -
Page 14: Assembly
Pay attention to not pinch the cable (18) during the next step. Mount the right column (69) to the main frame (1) using four bolts (70), four spring washers (7) and four washers (8). Repeat the steps for the left column (68). TX20... - Page 15 Step 2: Assembly of the console unit Connect the cable (18) with the cable of the cable (82) of the console. Mount the console on both columns using each three bolts (70), three spring washers (7) and three washers (8). Tighten all bolts.
- Page 16 The equipment must not be connected to a multiple socket, otherwise it cannot be guaranteed that the equipment will be supplied with sufficient power. Technical errors can result. Plug the power plug into a wall outlet that complies with the instructions in the chapter on electrical safety. TX20...
-
Page 17: Operating Instructions
OPERATING INSTRUCTIONS NOTICE Familiarise yourself with all the functions and setting options of the device before starting training. Have the proper use of this product explained to you by a specialist. SAFETY KEY ⚠ WARNING For your safety, the device is equipped with an EMERGENCY STOP function. The equipment can only be operated if the safety key is correctly attached to the contact point of the cockpit. -
Page 18: Console Display
Display range: 00:00–99.59 min. Setting range: 01:00–99:00 min. Display of the training distance in km DISTANCE Display range: 0.0–99.9 km Setting range: 1.0–99.0 km Display of the calories in kcal CALORIE Display range: 0–999 kcal Setting range: 10–990 kcal TX20... -
Page 19: Button Functions
Button Functions Button Description PROGRAM Press in the main menu to select between the programmes in the following order: Target programmes T, D, C Pre-set programmes P1–P12 User-defined programmes U1–U3 ▲▼ Press to increase or decrease the values. HEART RATE Press to select between the two hear rate controlled programmes HRC1 and HRC2. -
Page 20: Switching On The Treadmill
NOTICE You can make adjustments to the incline and speed. To pause the programme, press the STOP button. To resume the programme, press the START button. To end the programme, press the STOP button again in the paused programme. TX20... -
Page 21: Target Programmes
3.4.2 Target Programmes For the target programmes you can choose between T (time), D (distance) and C (calories). To reach the desired target programme, press the PROGRAM button. Set the desired value using the ▲▼ buttons on the upper keypad. To start the programme, press the START button. - Page 22 TX20...
-
Page 24: User-Defined Programmes
When the training time expires, a countdown will appear on the display and the treadmill will stop slowly. To pause the programme, press the STOP button. To resume the programme, press the START button. To end the programme, press the STOP button again in the paused programme. TX20... -
Page 25: Hear Rate Controlle Programmes
3.4.5 Hear Rate Controlle Programmes WARNING ⚠ Your training equipment is not a medical device. The heart rate measurement of this equipment may be inaccurate. Various factors can affect the accuracy of the heart rate measurement. The heart rate measurement serves only as a training aid. NOTICE A chest strap is required to use the heart rate controlled programmes. - Page 26 To pause the programme, press the STOP button. To resume the programme, press the START button. To end the programme, press the STOP button again in the paused programme. TX20...
-
Page 27: Storage And Transport
STORAGE AND TRANSPORT General Instructions ⚠ WARNING The storage location should be chosen so that improper use by third parties or children can be prevented. If your equipment does not have transportation wheels, the equipment must be disassembled before transportation. ࣑... -
Page 28: Folding Up The Treadmill
To release the hydraulic brake lock, use your left foot to push the upper part of the hydraulic brake slightly forward until the lock releases and the treadmill can be pulled back. Keep holding the treadmill. The hydraulic brake lowers itself gently downwards. Once the treadmill has lowered 2/3, you can let go of the treadmill. TX20... -
Page 29: Transportation Wheels
Transportation Wheels ࣑ ATTENTION If you want to transport your equipment over particularly sensitive and soft floor coverings, such as parquet, planks or laminate, lay out the transport route with cardboard or similar to avoid possible floor damage. Stand behind the equipment and lift it until the weight is transferred to the transportation wheels. -
Page 30: Troubleshooting, Care And Maintenance
Use a suitable chest strap (see Wrong position of chest No pulse display RECOMMENDED ACCESSORIES). strap Reposition chest strap and/or Chest strap defective or moisten electrodes battery empty Changing batteries Pulse display defective Check if pulse display by hand pulse possible TX20... -
Page 31: Error Codes And Troubleshooting
Error Codes and Troubleshooting The electronics of the equipment continuously carries out tests. In case of deviations, an error code appears on the display and normal operation is stopped for your safety. E01: Communication error - PCB receives no control signal Contact technical support. -
Page 32: Care And Maintenance
¼ turn anticlockwise. Then observe the mat for about 30 seconds, as the change is not immediately visible. Repeat this procedure until the running mat is straight again. If the running mat cannot be adjusted, please contact your contract partner. TX20... -
Page 33: Re-Tensioning The Running Mat
5.4.2 Re-tensioning the Running Mat If the running mat slips over the rollers during operation (if this is the case, there is a noticeable jerk during running), the running mat must be re tightened. In most cases, the slipping is caused by stretching of the mat through use. This is perfectly normal. NOTICE Re-tensioning is carried out using the same adjusting screws that are used for adjustment. -
Page 34: Maintenance And Inspection Calendar
The materials can be recycled as per their symbols. Through the reuse, recycling of materials or other forms of recovery of old equipment, you make an important contribution to the protection of the environment. TX20... -
Page 35: Recommended Accessories
RECOMMENDED ACCESSORIES To make your training experience even more efficient and pleasant, we recommend that you add suiting accessories to your fitness equipment. This could be a floor mat, for example, which makes your fitness equipment stand more securely and also protects the floor from falling sweat, but it could also be additional handrails on some treadmills or silicone spray to keep moving parts in good shape. -
Page 36: Ordering Spare Parts
The exact position of this sticker is shown in the following illustration. Enter the serial number in the appropriate field. Serial number: Brand / Category: cardiostrong / treadmill Model Name: TX20 Article Number: CST-TX20 TX20... -
Page 37: Parts List
Parts List Name Name Welding treadmill frame anti shock part Motor seat frame Philips countersunk head screw M8x25 DC motor Philips countersunk head screw M8x35 Socket head bolts M8x16 Front roller Socket head bolts M8x12 Socket head bolt M8x65 Inner socket head screws M8x85 Motor belt Spring washer Φ8x2.1 Running belt... - Page 38 Right sound cover Screw M4*22 Motitor cover set 4 cores wire Monitor down cover Safety key Heart rate set Left sound cover Right sound cover Screw M4*22 Motitor cover set 4 cores wire Monitor down cover Safety key Heart rate set TX20...
-
Page 39: Exploded Drawing
Exploded Drawing... - Page 40 TX20...
-
Page 41: Warranty
WARRANTY Training equipment from Taurus® is subject to strict quality control. However, if a fitness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline. Error Descriptions Your fitness equipment is developed for long-term, high-quality training. - Page 42 For that reason, we also want to resolve your queries quickly and in a straightforward manner. Thus, please always keep your customer number and the serial number of the faulty equipment handy. TX20...
-
Page 43: Contact
CONTACT TECHNICAL SUPPORT TECHNICAL SUPPORT & SERVICE TECHNICAL SUPPORT & SERVICE �� �� �� +49 4621 4210-900 80 90 16 50 +33 (0) 172 770033 +49 4621 4210-945 +49 4621 4210-933 �� +49 4621 4210-698 �� �� info@fitshop.dk service-france@fitshop.fr �� technik@sport-tiedje.de ��... - Page 44 The company employs numerous sports scientists, fitness trainers and competitive athletes. Visit us also on our social media platforms or our blog! TX20...
- Page 45 Notes...
- Page 46 Notes TX20...
- Page 48 Treadmill TX20...