Assembly - CARDIOSTRONG TX20 Assembly And Operating Instructions Manual

2.4

Assembly

Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
NOTICE
L
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of the columns
1. Place the right column (69) on the
main frame (1) and align the drill
holes.
࣑ ATTENTION
Pay attention to not pinch the cable
(18) during the next step.
2. Mount the right column (69) to the
main frame (1) using four bolts (70),
four spring washers (7) and four
washers (8).
3. Repeat the steps for the left column
(68).
14
1
TX20