Error Codes And Troubleshooting - CARDIOSTRONG TX20 Assembly And Operating Instructions Manual

5.3

Error Codes and Troubleshooting

The electronics of the equipment continuously carries out tests. In case of deviations, an error code
appears on the display and normal operation is stopped for your safety.
+ E01: Communication error - PCB receives no control signal
Contact technical support.
+ E02: Communication error - Drive not receiving digital signals
Contact technical support.
+ E04: Fault in the incline
Contact technical support.
+ E07: Overvoltage
Turn the treadmill off and on. If the problem persists, contact Technical Support.
+ E08: Motor circuit error
Contact technical support.
+ E12: Overcurrent protection
Contact technical support.
+ E13: Overcurrent protection - short-term abnormal peak current
Contact technical support.
Please contact Sport-Tiedje for technical support.
31